 |
CFW402 Filter Wheel with RGB+C Filters |
|
CFW402
Filter Wheel with BVI+C Filters This product is in development. We have been asked to provide an inexpensive internal filter wheel for the ST-402ME for photometric work using the B, V, I filters of the common UBVRI filter set used by professionals. Normal UBVRI filters cannot be installed on the ST-402 internal carousel. A custom set is being designed by SBIG for use with this low cost camera. Contact SBIG for further details. Part. #CFW-402 BVIC |
 |
CFW10-SA
Ten Position Filter Wheel The CFW10 allows you to carry a large array of standard 1.25" filters in one filter wheel without having to change carousels. LRGB+Clear filters for color imaging can be installed along with several narrow band filters such as H-alpha, O[III] and S[II], or a complete color plus photometric set. The CFW-10 SA will work with any camera in its stand alone mode. More info... Part. #CFW-10 SA |
 |
LRGB,
UBVRI and Narrowband Filters for CFW10-SA Red, Green, Blue, plus Clear and Luminance filters for color imaging are available in several varities. Our standard set suppresses light pollution while giving an excellent balance for all ST cameras. Astrodon filters are parfocal with other Astrodon narrowband filters and offer 1:1:1 exposure ratios. H-alpha, O[III] and S[II] filters are available for narrow band imaging of emisison nebula. Professional grade UBVRI filters are available for photometric studies. More info... |
 |
DSS-7 Deep Space Spectrograph The DSS-7 is a lower cost alternative to the SGS. The DSS-7 is actually more sensitive than the SGS making it excellent for Deep Space objects. It does not self-guide and it has slightly lower resolution than the SGS. It is optimised for popular Schmidt-Cassegrain telescopes but can be used on any system with an F/10 focal ratio. More info... Part. #DSS-7 |
 |
Extra
Nosepiece: 1.25" and 2" These T-thread nosepieces screw into the female t-threads on ST cameras. All ST cameras include at least one nosepiece. Each nosepiece is threaded to accept filters and notched for extra security in the event the retaining screw comes loose slighlty during the night. For a more solid connection to Schmidt-Cassegrain scopes, we also offer the SCT to T-thread Visual Back (see below). 1.25" Part. #50193 2" Part. #50146 |
 |
eFinder
focal reducer and 25mm f/4 guiding scope Many owners of the ST-402ME use it as an autoguider. The eFinder accessory originally made for the STV works very well with the ST-402ME. The efinder consists of a doublet lens held at the end of a tube that screws into the t-threads on the face of the camera. The entire assembly is extremely rigid. When attached, the lens acts as a 100mm FL f/4 guide scope capable of 1 arcsecond guiding with a wide field of view. More info... Part. #E-FINDER |
 |
SCT
to T-thread Visual Back For a more secure attachment of your camera to a Schmidt-Cassegrain telescope (or any scope using typical SCT threads) replace your nosepiece with this adapter. A matching hard plastic dust cap screws over the t-thread end if the camera is removed for any period of time. Part. #50702 |
 |
Quick Disconnect The Quick Disconnnect accessory lets you quickly remove the camera from the telescope, replace it with an eyepiece, and then return the camera to the telescope all without losing focus or position. It also lets you easily rotate the camera without losing focus. It is designed for use with an SCT. More info ... Part. #MS-QUICK DISCON |
 |
Male-to-Male T-thread adapter This adapter is also threaded internally for 1/25" filter cells, so it can be used to hold a single filter when attached to the front of the camera. Part. #50704 |
 |
110-220VAC
to 12VDC Power Supply This 110-220VAC to 12VDC supply is a replacement for the power supply that is included with the ST-402ME camera. The polarity is correct for this product (center pin positive) and the plug has a locking ring to hold it in place. The locking ring differentiates it from a similar supply with negative center pin used for the STV. Part. #51686 |
 |
Power
Supply Extension Cable This 10 foot (~3 m) cable extends the cord from the wall transformer to the camera with secure locking connectors at both ends. It is custom made with sufficiently heavy gauge conductor for minimum voltage loss. Part. #CA-ST402EXT |
 |
CLA-5
Camera Lens Adapter with T to C Mount Adapter This lens adapter comes in two parts: T-to-C Thread adapter ring and a C-thread to 35mm lens adapter. Both are necessary for using a 35mm camera lens with the ST-402/1603/3200 cameras. However, if you have C-mount lenses, only the T-to-C Thread adapter ring is required. 35mm camera lenses supported are Canon FD (manual focus only) and Nikon. Part. #CLA-5 |
 |
T
to C Mount Adapter This adapter ring is threaded on the outside with T-threads and inside with c-mount threads. When used in place of the nosepiece on an ST-402/1603/3200 model camera, c-mount lenses can be used for wide field imaging. Part. #51532 |
 |
Relay Adapter The relay adapter box converts the ST-402/1603/3200 electronic relays to mechanical relays. Most commercially available mounts such as those from Software Bisque, AP, Meade and Celestron do not require mechanical relays, but others, such as the classic Losmandy G-11 do require some other form of electrical isolation between the camera and the mount. If you are not sure, check with your mount manufacturer. Part. #MS-RELAYCONNECT |
 |
Tracking
Cable This replacement 6-pin RJ-11 to RJ-11 cable connects the camera to the autoguider ("CCD") port of your telescope drive. It is supplied with all STL cameras. Part. #50711
|
 |
Princeton Carrying Case with Custom Cut Foam This hard carrying and storage case is available with custom cut foam for the ST-402. ST-1603 and ST-3200 cameras. More info... Part. #51844 |
|
TheSky Version 5, Level II is distributed with SBIG cameras at no additional charge. This is a full working demo version of the program. Software Bisque offers a discount on upgrades to the latest version 6 at their web site http://www.bisque.com Save $10 to $30 depending on the package you choose or keep the demo version and run it as long as you like. It contains full version 5 capability with telescope control for many popular commercial goto scopes. More info ... Part. # |
|
A discount certificate is included with most models of SBIG cameras for Maxim DL/CCD. Maxim contains full SBIG camera control, including the ability to run 2 USB cameras at the same time, STV control and autoguiding through a series of exposures. The certificate entitles the purchaser to obtain this popular camera control and image processing program for $50 off the current list price when purchased directly from SBIG. More info... Part. # |
|
A discount certificate is included with all models of SBIG cameras for Ron Wodaski's popular book: The New CCD Astronomy. This book covers all the basics you need to know to get started in CCD imaging. But it is more than a beginner's book. It contains a wealth of information on image processing and tips for getting the most from you camera. Keep it as a reference book. The certificate if for $10 off the list price when purchased directly from SBIG. More info... Part. # |
|
Microproject's Equinox program for Macintosh is a planetarium program, including full camera control for SBIG USB cameras. SBIG will provide a free copy of EquinoX for Macintosh on request to any new camera purchaser who wants to use a Mac OS-X system to control his or her camera. Send us a copy of your camera purchase invoice and we will send you EquinoX at no charge. More info... Part. # |
|
CCDAutoPilot from CCDWARE automates many of the key functions of the image acquisition process without the need to learn complex scripting or specialized languages. CCD Autopilot also supports the self-guiding features of SBIG cameras as well as the AO-7 adaptive optics. A free 60 day trial version of CCD Autopilot will be included with all new SBIG cameras starting May 1, 2005. A certificate for a $50 discount will be included for those who like the program and wish to purchase the full retail version. More info... Part. # |
